GE DS2020SVSAG2 Mounted Panel Module

GE DS2020SVSAG2 Mounted Panel Module

Part Number DS2020SVSAG2 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS2020SVSAG2 is a power distribution module and is part of the GE Speedtronic Mark V gas turbine control. The Mark V control system uses more current microprocessors and offers a more flexible system setup. For control, it employs SIFT technology, as well as a new triple-redundant protection module and a considerable boost in hardware diagnostics. The quality, speed of installation, reliability, and convenience of online maintenance are all improved by standardized modular construction. 

Color graphic displays and standardized connectivity to distant operator stations and distributed control systems have improved the operator interface (DCS). The three identical control processors are dubbed and are at the heart of SPEEDTRONICTM Mark V control. These processors handle all-important control algorithms, turbine sequencing, and primary protective functions. They also collect and generate the majority of the data. The three identical control processors are dubbed and are at the heart of SPEEDTRONICTM Mark V control. These processors handle all-important control algorithms, turbine sequencing, and primary protective functions. They also collect information and create the majority of the alarms.

Benefits

Single slot CPU 

Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Supports floating point calculations 

Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

0.4 microseconds per boolean function 

64 MHz, 80486DX2 microprocessor 

Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

Configurable data and program memory 

Battery-backed calendar clock 

Three position operation mode switch 

Password controlled access 

Remote programmer keyswitch memory protection 

Four status LEDs 

Software configuration (No DIP switches or jumpers) 

Reference information inside front door 

In-system upgradable firmware

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.