GE DS215DMCBG1AZZ03A Circuit Board

GE DS215DMCBG1AZZ03A Circuit Board

Part Number DS215DMCBG1AZZ03A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS215DMCBG1AZZ03A is a Drive Board and is part of the GE Speedtronic Mark V gas turbine control system. There are five vertical cable connectors on this densely packed board (four male and one female). There are also three vertical header connectors, three stab-on connectors, and over twenty jumper switches. In the upper left quadrant, there is a reset switch that allows you to reset the board without turning it off first. The LED indicators tell the operator of the board's status during operation.

ABOUT THE 

The DS215DMCBG1AZZ03A is a board component manufactured by GE for use within their MKV Speedtronic system.  The MKV was designed for control of gas and steam turbine systems, and while MKV board components are no longer manufactured by the original manufacturer as members of a now-discontinued obsolete legacy product series, they can be found here at AX Control as reconditioned and fully tested units. The DS215DMCBG1AZZ03A is a Drive board. It offers updated hardware and/or firmware as compared to a like-named DS200 board. This DS215DMCBG1AZZ03A product is not the originally-developed PCB of its specific Mark V Series functionality, as evidenced by its DS215DMCBG1AZZ03A functional product number's attachment of the trailing "A" alphanumeric digit. While this DS215DMCBG1AZZ03A PCB's greater Mark V Series is generally functionally-obsolete, it is still lauded on the greater automated industrial marketplace as it is one of the lastly-developed Mark product series to feature the patented Speedtronic control system technology first seen in the initial Mark I Series rolled out in the later 1960s.

Hardware Tips and Specifications

The DS215DMCBG1AZZ03A is a heavily populated board with the following specifications: 

Five vertical cable connectors. These include four male and one female connector.

Three vertical header connectors. 

Two auxiliary boards. These include one vertically mounted board and one horizontally mounted board. Both boards are located in the bottom left corner. 

Three stab-on connectors. 

Over twenty jumper switches. 

A reset switch located in its upper left quadrant. 

LED indicators.

An inductor coil. 

TP test points for checking board voltages. 

Over fifty-five integrated circuits. These include oscillating chips, field programmable gate arrays, and EPROM chips for the storage of data.

Several fuse components. 

The DS215DMCBG1AZZ03A uses resistor network arrays, transistors, and various capacitors, diodes, and resistors. The board is marked for alignment along two of its edges using lettering and alignment marks and notches. It is drilled in the board corners, in the center of the board, and has additional drill holes along the board edges. For important information about handling and installation, please consult technical support products originally provided by General Electric. This includes manuals and data sheets. While this DS215DMCBG1AZZ03A product offering's originally-developed instructional manual materials are certainly a primary source of its hardware component and component specification information, they are generally unavailable online due to this DS215DMCBG1AZZ03A product's attribution to the now-obsolete Mark V Turbine Control System Series. Given this attribution. the DS215DMCBG1AZZ03A functional product number itself can be utilized as a supplementary source of DS215DMCBG1AZZ03A Board hardware information; coding for specific details in a series of functional naming chunks.