GE DS3800CXCIA Regulator Board

GE DS3800CXCIA Regulator Board

Part Number DS3800CXCIA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800CXCIA is a Regulator Board manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. In a gas turbine control system, a regulator board plays an essential role in maintaining and controlling the speed and power output of the turbine. The regulator board receives signals from various sensors that measure parameters such as temperature, pressure, and speed, and uses this information to control the fuel flow and other critical parameters. 

The regulator board typically contains electronic components such as microprocessors, digital signal processors, and power electronics. These components work together to process the input signals and generate appropriate control signals for the fuel system and other components in the gas turbine. The regulator board may also have built-in safety features, such as monitoring for abnormal operating conditions and automatically shutting down the turbine if necessary. Additionally, some regulator boards may be capable of communicating with other systems in the power plant, allowing for coordinated control and optimization of the overall plant operation. 

 FEATURES: Sensor Input: A regulator board receives input signals from various sensors that measure parameters such as temperature, pressure, and speed. These signals are used to monitor the operation of the gas turbine and adjust its control parameters accordingly. Control Algorithm: The regulator board contains a control algorithm that processes the input signals and generates appropriate control signals for the fuel system and other components in the gas turbine. The algorithm is designed to maintain the desired speed and power output of the turbine while minimizing fuel consumption and emissions. 

 Communication Capabilities: Some regulator boards are capable of communicating with other systems in the power plant, allowing for coordinated control and optimization of the overall plant operation. This can help to improve efficiency and reduce emissions. Redundancy: To ensure reliable operation, many regulator boards are designed with redundant components and backup systems. This helps to ensure that the regulator board can continue to operate even if one or more components fail. User Interface: The regulator board may have a user interface that allows operators to monitor the operation of the gas turbine and adjust its control parameters as needed. The user interface may also provide diagnostic information and troubleshooting tools to help operators identify and address any issues that arise.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).