DS3800DCMB1D1C | General Electric Printed Circuit Board

DS3800DCMB1D1C | General Electric Printed Circuit Board

Product Description P/N: DS3800DCMB1D1C Description / Specifications Description The DS3800DCMB1D1C General Electric Printed Circuit Board (PCB) is a critical component in industrial control systems, providing essential connectivity and signal routing. Its robust design ensures reliable operation and durability, facilitating efficient communication between system modules in demanding environments. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category PLCs/Machine Control Part Number DS3800DCMB1D1C Subcategory PC Board PLC/Add-On Board Type Printed Circuit Board (PCB) Series Mark IV Input Voltage 5 VDC Dimensions 330 mm (W) x 250 mm (H) x 60 mm (D) Mounting Rack mountable Operating Temperature 0 to 60掳C (32 to 140掳F) Storage Temperature -40 to 85掳C (-40 to 185掳F) Humidity 5% to 95% (non-condensing) Indicators LED status indicators Information About DS3800DCMB1D1C The GE Printed Circuit Board DS3800DCMB1D1C features a 40-pin connector and several EPROM modules. It also includes 4 indicator LEDs, 7 jumpers, and a 20-pin connector. 

The 40-pin connector is the main interface for signal transmission to and from the board. The attached ribbon cable is about 8 inches long, designed to connect to a nearby connector when the board is installed in the drive. This cable can handle up to 40 signals for transmission and reception. When disconnecting the ribbon cable, avoid pulling on the cable itself, as this can damage the fine wires and the plastic connector. Instead, grip the connector and pull it away from the board. To reconnect the cable, align the connector with the board's connector and press it into place. After installation and powering up the drive, you can use the LEDs to monitor board activity. The 4 LEDs, labeled TXDA, RXDA, DTSA, and CDA, will flash to indicate processing activity. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.