IS215WEPAH2B | General Electric Wind Energy Pitch Axis

IS215WEPAH2B | General Electric Wind Energy Pitch Axis

Product Description P/N: IS215WEPAH2B DESCRIPTION / SPECIFICATIONS Description The Wind Energy Pitch Axis IS215WEPAH2B was created by GE Energy for use within the Mark VIe Speedtronic control system series. This component has a functional revision rated as "B" grade. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category PLCs/Machine Control Part Number IS215WEPAH2B Subcategory PC Board PLC/Add-On Board Series Mark VIe Speedtronic Functional Acronym WEPA Functional Description Wind Energy Pitch Axis PCB Coating Conformal Coating Functional Revision 1 B COM Ports 3; COM1, COM2, and micro-miniature 9-pin socket D connector Ethernet Interfaces 10BaseT/AUI connector Relative Humidity 10-95%, non-condensing Shock maximum 10G, non-operating Female Plug Connectors 2 No.of Metal Oxide Varistors 4 Power Supply Rating 125 VDC Software Frame Rates 10, 20 and 40 ms Storage Temperature -40 to +70 degrees Celsius Information About IS215WEPAH2B The IS215WEPAH2B is a printed circuit board used in the Wind Energy Pitch Axis of General Electric's Mark VIe Speedtronic Series for wind turbine control systems. 

This component, identified by its unique part number, is a modified version of the original IS215WEPAH2B, with a functional revision rated "B." This revision enhances the board's functionality and efficiency without altering its aesthetics or dimensions. Hardware Tips and Specifications The IS215WEPAH2B board features several important hardware components for its role as a Wind Energy Pitch Axis. Notable input and output types include: 8 analog inputs 1 incremental encoder input 1 additional analog input 20 discrete inputs 2 discrete outputs 9 relay outputs 2 RS-485 interfaces 2 pulse-width modulated control outputs Besides these I/O types, the IS215WEPAH2B board's design includes a modular assembly, specifically comprising the AEPAH1B and the BPPB daughterboard. The board is part of the IS215 series, which indicates its specialized assembly style and that it was manufactured in Salem, Virginia. The "H2B" in the part number denotes a once-revised, conformally-coated PCB within the Group 2 Mark VIe series. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. 

It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.