GE DS3800HAIA Analog Conversion Board

GE DS3800HAIA Analog Conversion Board

Part Number DS3800HAIA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HAIA is an Analog Conversion Board developed by General Electric under Mark IV series. The board is built to be installed quickly in the drive. On one end, the board has a modular connector, while on the other, it has retention levers. Between the retention levers on the GE Analog Conversion Board, there are two 34-pin connectors. There are 8 jumpers and 2 trimmer resistors on the board. 

There is one socket on the board for an EEPROM (electrically erasable programmable read-only memory) module. The analog/digital converter is a board-mounted component. It transforms analog signals into digital signals. Throughout the trip, signal processing is done in digital format. There are numerous test points on the board. Each test point has its own unique ID. ES, DV, CLK, DB, AN, FOG, and ACON are some of the IDs. A servicer can use the test points to check the board's numerous circuits. The servicer must understand the purpose of the board as well as the components that make it up. 

The servicer must be aware of the risks associated with removing and replacing a board in a high-voltage drive. The testing device must be thoroughly calibrated for the testing environment and in good operating order. Test on a clean, dry surface free of debris, dust, and clutter. This is done to protect the board's surface from contaminants. The trimmer resistors are placed on the board so that they can be modified while it is in use. The resistance produced by the component can be adjusted by the installation with a screwdriver.

SPECIFICATIONS:

Part Number: DS3800HAIA1J
Manufacturer: General Electric
Series: Mark IV
Product Type: Analog Conversion Board
Board Size: 55 mm x 65 mm
Operating Temperature: 0 - 50� C
Repair: 3-7 Days
Weight: 0.15 Kg
Country of Origin: USA
Availability: In Stock

Benefits

Single slot CPU 

Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Supports floating point calculations 

Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

0.4 microseconds per boolean function 

64 MHz, 80486DX2 microprocessor 

Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

Configurable data and program memory 

Battery-backed calendar clock 

Three position operation mode switch 

Password controlled access 

Remote programmer keyswitch memory protection 

Four status LEDs 

Software configuration (No DIP switches or jumpers) 

Reference information inside front door 

In-system upgradable firmware