GE DS3800HDDA DISPLAY DRIVER

GE DS3800HDDA DISPLAY DRIVER

Part Number DS3800HDDA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HDTA is a Display Driver Board manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. A display driver board is an electronic component used to control and manage various types of displays, such as LCD (Liquid Crystal Display), LED (Light Emitting Diode), OLED (Organic Light Emitting Diode), or other types of visual output devices. Here are the primary functions and components of a typical display driver board: Interface Connectors: These boards usually have connectors that allow them to communicate with the display panel and with the system or device that needs to send visual information. 

 Control Circuits: These circuits are responsible for managing the signals sent to the display panel, controlling the refresh rates, and power supply to the pixels, and coordinating the display's output. Signal Processing: The driver board processes incoming signals and converts them into a format suitable for the display. For instance, converting digital signals to analog or manipulating signals to match the specific requirements of the display panel. Power Supply and Voltage Regulation: The board manages the power supply to the display, ensuring that the required voltage and current levels are maintained for proper operation. Backlight control (if applicable): In the case of displays that require a backlight, the driver board might also control the brightness and uniformity of the backlight. Integrated circuits and microcontrollers: These boards may contain integrated circuits and microcontrollers that manage the display functionalities and provide the necessary processing power to handle the display requirements efficiently.

Benefits

Single slot CPU 

Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Supports floating point calculations 

Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

0.4 microseconds per boolean function 

64 MHz, 80486DX2 microprocessor 

Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

Configurable data and program memory 

Battery-backed calendar clock 

Three position operation mode switch 

Password controlled access 

Remote programmer keyswitch memory protection 

Four status LEDs 

Software configuration (No DIP switches or jumpers) 

Reference information inside front door 

In-system upgradable firmware