GE DS3800HDDB Digital Display Module Driver Board

GE DS3800HDDB Digital Display Module Driver Board

Part Number DS3800HDDB Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HDDB is a Digital Display Module Driver Board manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. A digital display module driver board, also known as a display driver board or simply a driver board, is an electronic component that interfaces between a microcontroller or other control unit and a digital display module. 

The driver board provides the necessary signals, voltage levels, and control functions to drive the display module and enable the desired display functionalities. Digital display modules can include various types of displays, such as LCD (liquid crystal display), OLED (organic light-emitting diode), LED (light-emitting diode), e-paper, or other types. These modules come in different sizes, resolutions, and interfaces. The driver board typically contains a display controller or driver IC (integrated circuit) that is specifically designed to handle the requirements of a particular type of display module. 

The controller IC translates the control signals received from the microcontroller or control unit into commands that the display module can understand. FEATURES: Power Management: The driver board provides power supply regulation and voltage level shifting to match the requirements of the display module. Interface Conversion: It converts the control signals from the microcontroller or control unit into the appropriate format required by the display module. This can include parallel interfaces, serial interfaces (such as SPI or I2C), or specific protocols used by certain display modules. 

 Display Control: The driver board handles various display control functions, such as setting the brightness, contrast, and color settings of the display. It may also support features like backlight control, touch panel integration, or specific display module functionalities. Signal Amplification: In some cases, the driver board amplifies the control signals to meet the requirements of the display module, especially when driving larger or high-resolution displays.

SPECIFICATIONS:

Part Number: DS3800HDDB
Manufacturer: General Electric
Series: Mark IV
Product Type: Digital Display Module Driver Board
Operating temperature: -33 to 55 °C
Size: 8.25 cm high x 4.25 cm
Repair: 3-7 Day
Availability: In Stock
Weight: 2 lbs
Country of Origin: United States

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module