GE DS3800HHTB Highway Transmit Card

GE DS3800HHTB Highway Transmit Card

Part Number DS3800HHTB Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HHTB is a highway transmit card developed by General Electric. It was created by GE as part of the Mark IV series of turbine controllers. Over the years, the Speedtronic Mark series has evolved into the Mark IV system, which is a descendent of the Mark I and Mark II series. The Mark series has been used to control all elements of turbine operation, including safety since the creation of the Mark I system in the 1960s. The Mark IV system is the culmination of years of automation innovation, refinement, and improvement. Thirty-four integrated circuits occupy the circuit card. 

Every integrated circuit has a variety of components on one chip, including transistors, capacitors, and resistors. On the right edge of the card, there are three light-emitting diodes with indication lights. Under the three light-emitting diodes are four test points that can warn the operator of any problems with the card. A lengthy blackjack connector port runs down the card's left edge. On the left half of the board, there are diodes on both sides. The circuit card's lower border bears the full product number, DS3800HHTB, as well as the country of manufacturing (United States).

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition