DS3800HSHA1D1D | General Electric Slave Highway Board Mark IV

DS3800HSHA1D1D | General Electric Slave Highway Board Mark IV

Product Description P/N: DS3800HSHA1D1D DESCRIPTION / SPECIFICATIONS Description The DS3800HSHA1D1D is a circuit board designed by General Electric for use in the Speedtronic Mark IV series, which is utilized for the control of gas and steam turbines. This board is part of the legacy Mark IV series, known for its long-standing role in turbine control and safety. Technical Specifications Part Number DS3800HSHA1D1D Manufacturer General Electric Series Speedtronic Mark IV Function Slave Highway 

Board Information About DS3800HSHA1D1D The DS3800HSHA1D1D is a circuit board designed and manufactured by General Electric, specifically produced as part of the Speedtronic Mark IV series. The Mark IV series is utilized in the control systems of gas and steam turbines, with the Mark products being employed to ensure the reliable and safe operation of turbine systems since the introduction of the Mark I series in the 1960s. The DS3800HSHA1D1D board is equipped with various circuit components and connectors essential for its functionality. 

On the left side of the board, there is a large jack connector port, while a smaller connector port is located on the opposite side. These connectors facilitate the attachment of additional components or the integration of the board with other circuit boards. Adjacent to the large connector port, the board includes a medium-sized blue capacitor. Throughout the board, there are twenty-five (25) integrated circuits of various sizes. Each integrated circuit incorporates multiple components, including capacitors, resistors, and diodes, all contained within a single chip. The board is also outfitted with a series of jumper pins fitted with red jumpers located along both the top and bottom edges. 

 Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.