GE DS3800NFLA Fan Loss Card

GE DS3800NFLA Fan Loss Card

Part Number DS3800NFLA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800NFLA is a Fan Loss Card manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. In a turbine control system, a Fan Loss Card (FLC) is a printed circuit board that monitors the status of the fan or blower that is used to cool the electronics within the control system. The FLC typically contains sensors and monitoring circuits that detect any changes in the fan's speed or function and can alert the control system to any problems. The FLC is an important component in the overall control system, as overheating of the electronic components can cause malfunctions or even damage to the turbine. 

By constantly monitoring the fan's status, the FLC helps to ensure that the system stays within safe operating parameters and can take appropriate actions if any issues arise. FEATURES: The features of a Fan Loss Card (FLC) in a turbine control system may vary depending on the specific design and manufacturer, but some common features include: Fan Monitoring: The FLC monitors the speed, temperature, and vibration of the cooling fan or blower. If the fan stops or malfunctions, the FLC can alert the control system to take appropriate actions. Alarms and Indicators: The FLC may have visual and audible indicators to alert operators to any fan-related issues. It may also send alarms to the control system or a monitoring station. Fault Diagnostics: The FLC can perform diagnostic tests on the fan and its associated circuits to detect faults or malfunctions. It may provide fault codes or other diagnostic information to aid in troubleshooting. Communication Interface: The FLC may have a communication interface, such as a serial port or Ethernet connection, to allow for remote monitoring and control.

SPECIFICATIONS:

Part Number: DS3800NFLA
Manufacturer: General Electric
Series: Mark IV
Product Type: Fan Loss Card
Number of channels: 12
Operating temperature: -45 to 55 °C
Size: 8.24 cm high x 4.16 cm
Repair: 3-7 Day
Availability: In Stock
Weight: 2 lbs
Country of Origin: United States

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required

Ease of Use

• Simple and powerful instruction set 

• One-axis or two-axis motion programs with synchronized block start 

• Program support for a short motion program (called Program Zero) which can be created in the MS-DOS programming software configuration function 

• Nonvolatile (flash) storage for 10 programs and 40 subroutines 

• User scaling of programming units (in Standard mode only) 

• Generic programming using command parameters as operands for Acceleration, Velocity, Move and Dwell commands 

• Configured with MS-DOS configuration software