GE Fanuc MMII-PD-1-2-240 Programmable Automation Controller

MMII-PD-1-2-240

Model:MMII-PD-1-2-240 Brand:GE Fanuc Type:PAC System Series:Mark VII Module Type:Processor Control Board Architecture:Open System Architecture Operating System:Proficy Machine Edition Software Processor:PowerPC Technology RAM:64 MB Flash Memory:32 MB Communication Interfaces:Ethernet, Serial Power Supply:12-24 VDC Backplane Support:Universal Dimensions:17 x 17 x 3 inches Weight:6 pounds Input Voltage Range:85-264 Vac Output Voltage Range:12-24 VDC Number of I/O Channels:16 Inputs, 16 Outputs Programming Languages:Structured Text, Ladder Diagram Diagnosis Features:Online Troubleshooting, Diagnostic Logging Maintenance & Compatibility:Compatible with latest software updates The GE Fanuc MMII-PD-1-2-240 PAC System boasts an integrated design that optimizes performance and reliability in demanding industrial environments. Its compact size ensures seamless integration into existing control systems without compromising functionality. 

 Equipped with a robust microprocessor, this module supports real-time control applications with precision and speed. It is compatible with leading PLC programming languages, enabling easy setup and customization. With its wide operating temperature range, the MMII-PD-1-2-240 is suitable for use in a variety of industrial settings, from cold storage facilities to hot manufacturing plants. The inclusion of RS-485 and Ethernet communication interfaces facilitates seamless data exchange with other control devices, enhancing system interoperability and efficiency. Compliance with international safety standards, including UL, CE, and ISO 9001, ensures that the GE Fanuc MMII-PD-1-2-240 meets stringent quality and safety requirements, providing peace of mind for users. The GE Fanuc MMII-PD-1-2-240 is a high-performance Programmable Automation Controller designed for industrial applications requiring precise control and reliability. It is equipped with advanced features to optimize process operations in manufacturing environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module