FOXBORO FBM233 P0926GX Field Device System Integrator Module

FOXBORO FBM233 P0926GX Field Device System Integrator Module

OVERVIEW

Each FBM233 module has a single 10/100Mbps copper Ethernet connection and a single RJ-45 connector on the front of the module for connectivity to dual-ported Ethernet devices. The FBM233 is connected to Ethernet switches or hubs in order to communicate with one external device or up to 64 external devices. A pair of modules combine to provide redundancy at the Fieldbus Module (FBM) level. In this configuration, one FBM233 is the Master, and the other is the Tracker module. 

FEATURES 

 Key features of the FBM233 are: 

  Redundant 10 Mbps or 100 Mbps Ethernet network transmission rate to/from field devices 

  Communicates with up to 64 field devices 

  I/O software driver is downloadable from a library of available protocols 

  Up to 2000 DCI block connections 

  Integrates field device data into a Foxboro Evo control database using Ethernet connectivity 

  Field mounted 

  Class G3 (harsh) environments.

Main Features and Functions

Multi-Channel Input/Output Support:

The module supports multiple digital and analogue input channels for connecting sensors, switches and other input devices to monitor external conditions and events.

It also supports multiple digital and analogue output channels for controlling actuators, valves, motors and other external devices to perform a variety of control tasks.

Real-time data exchange:

The FBM233 P0926GX module is capable of transmitting collected data to control systems (e.g. PLC, DCS, SCADA systems, etc.) in real time and receiving instructions and commands from the control system.

Multiple signal types support:

The module supports different types of input signals, including switching and analogue, to meet the needs of different applications.

It is also capable of handling different types of output signals to control different types of external devices.

Power Management and Supply:

The FBM233 P0926GX module has a power management function that can provide one or more power output channels to provide the required power supply for other modules and devices.

It supports different types of power outputs, such as direct current (DC) or alternating current (AC), to suit the power requirements of different devices.

Remote monitoring and management:

The module may have remote monitoring and management capabilities that allow the user to remotely monitor power supply status and performance, as well as perform troubleshooting.

Communication Interfaces and Protocols:

The FBM233 P0926GX module is usually equipped with a variety of communication interfaces, such as Ethernet, serial port, CAN bus, etc., to exchange data and communicate with other devices and systems.

It supports a variety of communication protocols, such as Modbus, Profibus, etc., to facilitate data exchange and communication with other devices or control systems.

Security and Reliability:

The module is equipped with security features to safeguard the secrecy of data and the stability of the system.

It is well-designed to withstand harsh industrial environments and run stably for a long time.

Easy to install and maintain:

FBM233 P0926GX module adopts standardised interfaces and connections, which is easy for users to install and maintain.

I/O DRIVERS

This FBM is a generic Ethernet hardware module in which different software drivers can be loaded. These drivers configure the FBM to recognize a particular protocol used by the device. Several of these software drivers are a standard product offerings. Other custom drivers can be developed to meet specific needs. These drivers are dynamically downloaded to the FBM233 with software code specifically designed to interface with the third party device’s protocol.

ETHERNET LINK SETUP

Data communication between the FBM233 and field devices are through the RJ-45 connector located on the front of the FBM233 module. The RJ-45 connector of the FBM233 can be connected through hubs, or through Ethernet switches to the field devices (refer to “ETHERNET SWITCHES FOR USE WITH FBM233” on page 7). The FBM233 is connected to Ethernet switches or hubs in order to communicate with one external device or up to 64 external devices.

OPERATIONS

Each FBM233 pair can access up to 64 devices to read or write data. From the Foxboro Evo control station to which the FBM233 is connected (refer to Figure 1), up to 2000 Distributed Control Interface (DCI) data connections can be made to read or write data. Supported data types are determined by the particular driver loaded on the FBM233, which converts the data to the DCI data types listed below: 

  An analog input or output value (integer or IEEE single-precision floating point) 

  A single digital input or output value 

  Multiple (packed) digital input or output values (packed in groups of up to 32 digital points per connection)