GE DS200CTBAG1ADD Terminal Board

GE DS200CTBAG1ADD Terminal Board

Product Overview

The DS200CTBAG1ADD terminal block is a narrow circuit board designed for use with the GE Mark V Speedtronic system.The Speedtronic series was created by General Electric (GE) to control large and small gas and steam turbine systems.The DS200CTBAG1ADD terminal block, as part of this system, plays a a key connection and control role.

Key Features and Components

Connectors and Terminal Blocks:

Equipped with five vertical pin cable connectors, two vertical pin header connectors and one 9-pin male serial connector.

There are two double-stacked terminal strips, located at the edge of the long board, with multiple connectors on each.

Circuit Board Construction:

Each corner and long edge is drilled for mounting hardware and other connections.

Two of the drilled holes are surrounded with conductive material.

Circuit boards are labelled with identification codes, including the board ID number and company logo.

Analogue termination module:

The DS200CTBAG1ADD is an analogue termination module typically located within the core.

The board has multiple connectors, including two COREBUS connectors (JAI and JAJ).

Technical Specifications and Parameters

While specific technical specifications and parameters may vary due to product versions and manufacturer updates, the DS200CTBAG1ADD terminal board typically has the following basic specifications:

Designed for: Designed for use with GE Mark V Speedtronic systems.

Board Type: Narrow and long, containing a variety of components.

Connector types: Vertical pin cable connectors, vertical pin header connectors, and 9-pin male serial connectors.

Terminal block configuration: two double stacked terminal blocks.

Application Scenarios

DS200CTBAG1ADD terminal block is mainly used in the following scenarios:

Gas and steam turbine control: As part of the GE Mark V Speedtronic system, the DS200CTBAG1ADD terminal board plays a key role in the control system of gas and steam turbines.

Industrial Automation: In industrial automation, this terminal block is used to connect a variety of sensors, actuators and controllers for precise control and monitoring of equipment.

Power System: In the power system, DS200CTBAG1ADD terminal board can be used for the control and protection of power equipment to ensure the stable operation of the power system.

Precautions and Maintenance

Installation and Maintenance:

When installing the DS200CTBAG1ADD terminal block, follow the installation guidelines and manuals provided by the manufacturer.

Regularly check the connection status of the connectors and terminal blocks to ensure that the connections are firm and reliable.

Avoid use in humid, high-temperature or corrosive environments, which may affect the performance of the equipment.

Replacement and Purchase:

Note that these boards are no longer manufactured and distributed by GE.

Fully tested and refurbished models are available for purchase through sources such as AX Control if required.

Maintenance and Troubleshooting

Periodic Checks:

Periodically check the status of the LEDs on the board to ensure that all signals are functioning properly.

Check that jumpers are configured correctly to ensure proper operation of the board.

Cleaning and Maintenance:

Keep the surface of the circuit board clean and dry to avoid dust and moisture damage to the board.

Regularly check the connection of power and signal cables to ensure that the connection is firm and reliable.

Troubleshooting:

If a fault occurs, you can troubleshoot the problem by checking the LED indicators, jumper configurations, power and signal cables.