HONEYWELL TC810E1032A OUTPUT MODULE

HONEYWELL  TC810E1032A OUTPUT MODULE

DESCRIPTION

The Honeywell series of modules are a family of microprocessor controlled interface devices permitting the monitoring and/or control of auxiliary devices. The TC810E1032A is an output module that allows the control of auxiliary devices such as fire shutters or sounders. A single tri-colour LED indicates the status of the module. In normal conditions, the LED can be set by command from the control panel to blink green when the module is polled. When the control panel switches the relay to the energised state the LED can be set to continuous green.

SPECIFICATION

Operating Voltage Range: 15 to 32 VDC (Min 16.5 VDC for LED operation) 

Maximum Standby Current 160 µA - No Communication 

LED Current (Red): 1.5 mA 

LED Current (Yellow): 5.5 mA 

Isolator features: see S00-7100 

Humidity: 5% to 95% relative humidity (non-condensing) 

Maximum Wire Gauge 2.5 mm²

TC810E1032A Single Output Module with Supervised Output 

When the module is used in supervised mode and power is supplied to the module, a switched negative input on terminal 12 can be used to signal an external fault condition, such as a power supply fault. Loss of power is also supervised in this mode such that if the supply voltage falls below 7 V a fault indication is achievable. Note that the use of this fault mode is dependant on panel software. Please contact the panel manufacturer for further details.

Functional Features

Compatibility: Honeywell products typically have good compatibility with other brands of fire protection or automation control systems, and the TC810E1032A output module may follow this characteristic and be able to adapt to a wide range of control systems.

Output Capability: As an output module, the TC810E1032A may have the ability to control external devices such as sirens, indicator lights, relays, etc. For specific output capabilities (e.g., current, voltage range, contact type, etc.), refer to the official technical manual or datasheet.

Programming and Configuration: Honeywell products often support programming and configuration features to meet the needs of different application scenarios. the TC810E1032A output module may also support programming and configuration via software or hardware to implement specific control logic.

Fault Detection and Alarm: In order to ensure the stability and reliability of the system, the TC810E1032A output module may be equipped with fault detection and alarm functions. When abnormalities or faults are detected, an alarm signal can be sent to the control system in time.

Protection level: Considering that fire-fighting equipment usually needs to cope with harsh environmental conditions, the TC810E1032A output module may have a high protection level (e.g., IP rating) to ensure that it can still work properly in environments such as wet and dusty environments.

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition