GE IC200PWR001 DC Power Supply

GE IC200PWR001 DC Power Supply

Part Number IC200PWR001 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockThe GE Fanuc IC200PWR001 is a 24 Volts DC power supply input module that provides power to CPU, NIU, and I/O modules via the backplane. The power supply module has a maximum output current of 1.5 amps via 3.3 volts & 5-volt output, with up to 0.25 amps on the 3.3-volt output. If the power supply module is mounted on the CPU or NIU, it can be considered the station's main power supply. When mounted on a Power Supply Booster Carrier, the supply module can also be used as a backup power supply. 

It has an input voltage range of 18 to 30VDC, a nominal voltage of 24VDC, and an input power of 11 watts. This power supply module has a 10ms holdup time, an inrush current of 20A at 24VDC, and a 25A inrush current at 30VDC. It also has an output voltage of 5VDC and 3.3VDC. The total output current should not be more than 1.5A. The supply module provides short circuit, overload, and reverse polarity protection. DC- must be grounded to frame/earth ground when wiring. Because DC- is grounded to the power supply's internal frame, floating power sources should not be used.

Ease of Use

• Simple and powerful instruction set 

• One-axis or two-axis motion programs with synchronized block start 

• Program support for a short motion program (called Program Zero) which can be created in the MS-DOS programming software configuration function 

• Nonvolatile (flash) storage for 10 programs and 40 subroutines 

• User scaling of programming units (in Standard mode only) 

• Generic programming using command parameters as operands for Acceleration, Velocity, Move and Dwell commands 

• Configured with MS-DOS configuration software 

Technical features

Programmability: Users can program and customise the module according to specific application requirements to achieve precise control of industrial processes and improve productivity and product quality.

Integration and compatibility: The module can be seamlessly integrated with other ABB products and solutions to form a unified automation platform. It also has excellent compatibility with other manufacturers' equipment and systems.

High performance and reliability: High-performance hardware and software are used to ensure stable operation and efficient control in industrial environments. With advanced fault detection and diagnostic functions, potential problems can be detected and dealt with in a timely manner, improving the reliability of the system.

Flexibility and expandability: with modular design, it can be flexibly configured and expanded according to actual needs. Whether it is a small or large project, it can be easily integrated into the existing automation system.

Easy to use and maintain: Provides an intuitive user interface and powerful diagnostic tools, enabling users to operate and maintain with ease.

Application Functions

Multi-functional control: The module can perform a variety of control functions, including logic control, motion control, temperature control, etc., to meet the needs of different application scenarios.

Digital control: Provides digital control functions that allow users to programmatically define and execute control logic to achieve precise control of complex industrial processes.

Communication Capability: Supports a variety of digital communication protocols, such as Ethernet, Profibus, Modbus, etc., in order to communicate with other devices, monitoring systems, or upper level control systems, and to achieve centralised management and monitoring of all parts of the system.

PLC Integration: Compatible and able to be integrated into ABB or other manufacturers' PLC systems to achieve seamless integration and overall synergy with other automation equipment and control systems.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider