GE IC3600AOAC1 Dual Amplifier Control Board

GE IC3600AOAC1 Dual Amplifier Control Board

Part Number IC3600AOAC1 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIC3600AOAC1 is a Dual Amplifier Control Board manufactured and designed by General Electric and is part of the Mark I & II Series used in gas turbine control systems. A dual amplifier control board is a device used in audio systems to control two amplifiers simultaneously. It provides various functions and features to manage the amplifiers effectively. The control board typically includes input selection, volume control, equalization options, and other audio processing capabilities. Here are some common features you might find on a dual amplifier control board: Input Selection: The control board allows you to choose between different audio sources or inputs. 

This could include options like line-level inputs, digital inputs, or even Bluetooth connectivity. Volume Control: It provides volume adjustment capabilities for each amplifier channel, allowing you to balance the sound levels between the two amplifiers. Tone Control: Many control boards offer tone control features such as bass, treble, and sometimes mid-range adjustments. These controls can help you fine-tune the audio output to your preference. Balance Control: Some control boards include a balance control knob to adjust the left-right balance of the audio output. Source Switching: You can switch between different input sources using dedicated buttons or knobs on the control board. LED Display: A control board often incorporates an LED display to show the selected input source, volume levels, or other relevant information. Protection Circuitry: To safeguard your amplifiers, some control boards include built-in protection circuitry like overcurrent protection or over-temperature protection. Power Supply: The control board may have its own power supply or draw power from the amplifiers themselves.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.