GE IC698CHS009A High Performance Control System Module, for Advanced Automation Solutions

GE IC698CHS009A  High Performance Control System Module, for Advanced Automation Solutions

Module Type:CPU Rated Speed:600 MHz User Memory:64 MB Network Type:Ethernet Communication Speed:10 to 100 Mbps Operating Voltage:DC 5 V Current Draw:1.2 A Weight:0.62 kg The GE IC698CHS009A is engineered for seamless integration into modern industrial control systems, featuring a robust Ethernet interface for high-speed data transfer. This module boasts an impressive 600 MHz processing speed, ensuring fast and reliable operation even under demanding conditions. Equipped with a substantial 64 MB of user memory, it offers ample space for storing critical application data, reducing the need for external storage solutions and streamlining system architecture.

 Designed with industrial durability in mind, this module is capable of operating within a wide temperature range (-40"C to +70"C), making it suitable for deployment in harsh environments. The IC698CHS009A supports various communication protocols, including Ethernet, which facilitates easy connection to other components in the system, enhancing overall network performance and flexibility. This product is meticulously crafted from high-quality materials, ensuring long-lasting reliability and minimal maintenance requirements. Its compact design and modular construction enable efficient installation and quick setup. Compliance with international standards such as ISO 9001, UL, and CE guarantees safety and quality, providing peace of mind for users seeking robust and certified industrial solutions. The GE IC698CHS009A is a state-of-the-art programmable logic controller (PLC) designed for industrial automation. It seamlessly integrates with various industrial systems, providing exceptional control and reliability in demanding environments. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module