GE VIS200SAMBH1A Acoustic Monitoring Terminal Board

GE VIS200SAMBH1A Acoustic Monitoring Terminal Board

Part Number IS200SAMBH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockIS200SAMBH1A is an Acoustic Monitoring terminal board and is part of the GE Speedtronic Mark VI gas turbine control. The twin terminal board adds eighteen inputs to the Acoustic monitoring system via thirty-six terminals on terminal strips for a two-wire input connection. There are also terminal strips on the board with 36 terminal connections set aside for the installation of two-wire buffered outputs, totaling eighteen outputs. 

Typically, these outputs are used to monitor voltage signals. To defend against externally sourced high-frequency noise, the IS200SAMBH1A is equipped with passive electromagnetic interference (EMI) filters. The IS200SAMBH1A has a connected metal frame that surrounds the PCB on all four sides. This frame has a top hat flange along each long edge of the board that has been drilled with mounting notches or holes, as well as other flanges. Various codes, including FA/00, are written on the board surface. Standoffs and screw mounts link the board components to the previously described frame. The board is 9.1 inches by 5.625 inches in size. Air convection is used to cool the room.

About the IS200SAMBH1A

The IS200SAMBH1A is a PCB (printed circuit board) device manufactured by GE for their Mark VI and Mark VIe systems. These systems were released by GE to improve the efficiency of their gas and steam turbines through reliable management. They are both TMR (triple modular redundant) systems that offer multiple backups on critical controls and protection parameters. The Mark VIe Series that this IS200SAMBH1A product offering may belong to is quite the upgrade on the previous Mark V Series, as its possible applications exist extended to wind turbine-geared alternative energy settings as well. This IS200SAMBH1A product's greater Mark VI Turbine Control System Series is still attracting some concerted demand within the current automated industrial community, though, as it is one of the final-developed GE Mark product series to make use of the patented Speedtronic control system technology seen first with the release of the Mark I and maintained ever since.

Hardware Tips and Specifications

The IS200SAMBH1A is an Acoustic Monitoring terminal board. The dual terminal board adds eighteen inputs to the Acoustic monitoring system via thirty-six terminals located on terminal strips that are for the attachment of two-wire inputs. The board also has terminal strips with thirty-six terminal connections reserved for the addition of two-wire buffered outputs, eighteen outputs in all. These outputs typically monitor voltage signals. The IS200SAMBH1A is populated with passive electromagnetic interference (EMI) filters to protect against externally sourced high-frequency noise. The IS200SAMBH1A is designed with an attached metal frame that surrounds all four edges of the PCB. This frame has multiple flanges, including a top hat flange placed along each long edge of the board that has been drilled with mounting notches or holes. The board surface is marked with various codes, including FA/00. Board components and the previously mentioned frame are connected via standoffs and screw mounts. The board measures 9.1 inches by 5.625 inches. Cooling is achieved through air convection. The IS200SAMBH1A is populated by a number of jumper switches. These are used to connect the SigX line to the constant current source. More information about the board, its components, operation, and installation, may be found through manufacturer user guides and manuals.

This IS200SAMBH1A product is a highly voltage-sensitive Mark VI Series product, and has been reinforced for its highly voltage-intensive functional Mark VI Series role through its utilization of a Mark VI Series-standardized selection of voltage-limiting hardware components and component specifications including different iterations of Mark VI Series capacitor, diode, resistor, and finally integrated circuit components. The above-included information on this IS200SAMBH1A personalized product page here is truly more telling of this IS200SAMBH1A device's lack of online-available original General Electric instructional manual materials than it is of its true importance to the IS200SAMBH1A product. Given this identified lack of documentation, this IS200SAMBH1A product's functional product number can actually be identified as a decently-strong primary source of IS200SAMBH1A Board hardware component and component specification information, as it codes for pertinent hardware information through a series of GE-designed functional naming chunks. One such chunk is the dual-functional IS200 segments indirectly responsible for describing this IS200SAMBH1A product's normal Mark VI Series assembly as well as its domestic original location of manufacture. Some of the other pertinent hardware details stored in the IS200SAMBH1A functional product number include this PCB's:

SAMB functional product acronym

Conformal PCB coating style

Group one Mark VI Series product grouping

A-rated functional product revision