GE IS200TBCIS2C - TERMIN.BD, CONTACT INPUT

GE IS200TBCIS2C - TERMIN.BD, CONTACT INPUT

Part Number IS200TBCIS2C Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockGeneral Electric Speedtronic Mark VIeS IS200TBCIS2C is a Discrete Input Terminal Board and its designed as a terminal board for the Mark VI system. This is a very lengthy circuit board with a number of electrical components, including two terminal blocks for holding a collection of terminals. 

Each of these terminal blocks has 48 silver metal terminals or twenty-four terminals. They are designated TB1 and TB2 and have a number inscribed in white writing on them. This board also has five solid red capacitors positioned between the small, totally spherical terminal blocks. Additional components have been put in multiple parallel rows of four components each in the middle of the board. It has filters on each input that decrease high-frequency noise while also suppressing surges. Each input has a pair of terminal points, with one screw supplying a positive dc source and the other providing a return to the board. The first 21 inputs are currently loaded at 2.5 mA per point, whereas the last three are loaded at 10 mA. There are no hardware settings or jumpers on the board.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

Benefits

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider