GE Fanuc IS200VCRCH113 Gas Turbine Control Module

GE Fanuc IS200VCRCH113 Gas Turbine Control Module

Model Number:IS200VCRCH113 Brand:GE FANUC Module Type:Gas Turbine Control Operating Voltage:380V AC Input Current:2A Communication Protocol:MODBUS RTU Operating Temperature Range:-20"C to +60"C Dimensions:290mm x 178mm x 95mm Weight:5.5kg Power Consumption:20W The GE Fanuc IS200VCRCH113 is a cutting-edge gas turbine control module that ensures optimal performance and reliability in demanding industrial environments. This module is meticulously engineered to provide seamless integration into existing automation systems, enhancing efficiency and reducing maintenance requirements. With an operating temperature range from -40"C to 70"C, this control module is designed to withstand extreme conditions typically encountered in power generation facilities, ensuring uninterrupted operation throughout the year. 

 Equipped with advanced communication interfaces such as Ethernet and RS-485, the IS200VCRCH113 facilitates efficient data exchange and control commands, enabling real-time monitoring and adjustments of gas turbines for improved energy output and operational stability. Featuring a low power consumption of less than 15W, this module optimizes energy usage, contributing to reduced operational costs and environmental impact. It is an eco-friendly solution that aligns with sustainable practices in modern industrial operations. Built with robust materials and subjected to rigorous quality testing, the IS200VCRCH113 meets international safety and performance standards, including CE, UL, and FCC certifications, guaranteeing reliability and safety in professional settings. The GE FANUC IS200VCRCH113 is a critical component in gas turbine control systems, designed to enhance system performance and reliability through advanced control algorithms and precise monitoring capabilities.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).