GE-FANUC IS200VCRCH1BBB Mark VI Circuit Board

GE-FANUC IS200VCRCH1BBB  Mark VI Circuit Board

Board Type:I/O Processor Board Manufacturer:General Electric Company Model:IS200VCRCH1BBB Series:Mark VI Number of Discrete Inputs:48 Discrete Contact Inputs:Not Specified Number of Outputs:24 Relay/Solenoid Outputs:Present Functional Acronym:VCRC Dimensions:Not Specified Weight:Not Specified Compatibility:Mark VI System Guide Experience unparalleled reliability and efficiency with the GE Fanuc IS200VCRCH1BBB Mark VI Circuit Board. Designed specifically for industrial automation, this board ensures seamless integration and operation across diverse applications. Equipped with 48 discrete input channels and 24 relay/solenoid outputs, it provides robust control capabilities for monitoring and actuating processes. 

 Featuring a compact yet sturdy design, this board can withstand extreme environmental conditions, ensuring uninterrupted performance in harsh industrial settings. Manufactured under strict quality standards, it comes with UL, CE, and ISO 9001 certifications, offering peace of mind for users seeking high-quality industrial components. Easy to integrate and customize, this board supports a wide range of protocols, making it a versatile choice for enhancing the operational efficiency of industrial machinery and systems. Engineered for precision control in industrial automation systems, the GE Fanuc IS200VCRCH1BBB is a critical component designed to manage complex processes with reliability and efficiency.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module