GE IS215VCMIH2C VME Bus Master Controller Board

GE IS215VCMIH2C VME Bus Master Controller Board

Part Number IS215VCMIH2C Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockIS215VCMIH2C is a VME Bus Master Controller Board manufactured and designed by General Electric as part of the Mark VI Series used in GE Speedtronic Control Systems. The communication link between the controller and the I/O boards, as well as the link to the IONet system control network, is provided by the VME Bus Master Controller (VCMI) board. The IDs for all the boards in the rack and their corresponding terminal boards are managed by VCMI, which is also the VME bus master in the control and I/O racks. 

 The IONet may link to various I/O racks, each of which has a VCMI board. Three simplex system setups using the VCMI with local and distant I/O are shown in the accompanying figure. The first example is a compact system in which all of the I/O is mounted in the VME control rack, negating the need for any additional distant I/O racks. 

The VCMI features three IONet ports, with one for each of the three channels (R, S, and T). A larger system with distant I/O racks makes up the second illustration. Although many I/O racks are supported by one IONet, only one rack is displayed here. Regarding I/O boards and points, all I/O channels (R, S, and T) are identical.

SPECIFICATIONS:

Part Number: IS215VCMIH2C
Manufacturer: General Electric
Series: Mark VI
Product Type: VME Bus Master Controller Board
Number of channels: 12
Board Type: 6U
Processor: 32-bit
Memory: Dual-port memory
Frame Rate: 10 ms
Analog output current: 0-20 mA
Size: 10.16 cm wide x 33.02 cm
Power Requirements: +5 V dc
Operating temperature: -30 to + 65 C
Size: 17.8 cm wide x 33.02 cm
Repair: 3-7 Day
Availability: In Stock
Country of Origin: United States
Manual: GEH-6421M

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.