GE IS220PDIAH1B - IO PACK, CONTACT IN

GE IS220PDIAH1B - IO PACK, CONTACT IN

Part Number IS220PDIAH1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockThe IS220PDIAH1B is a GE Mark VIe I/O pack. This can be used with a number of different GE terminal boards. The IS220PDIAH1B has been certified for usage in hazardous environments. IS200STCIH8A, IS200STCIH1A, and 2A, IS200TBCIH2C or H4C, IS400STCIH1A or 2A, IS400TBCIH2C, or IS400STCIH8A are some of the terminal boards that can be used with the PDIA I/O.These are usually power distribution boards from the Speedtronic Mark VIe system. 

 The nominal voltage rating of this I/O pack is 24 VDC, with a maximum voltage rating of 28.6 VDC. The maximum voltage rating for contact inputs is 32 VDC. Both non-hazardous and hazardous areas are covered by the UL listing. All of the different Class and Zone UL designations can be found in the documentation. This module is suitable for temperatures ranging from -30 to +65 degrees Celsius.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

The Series 90* -30 CPU374 PLUS provides a built-in enhanced Ethernet interface that  provides TCP/IP communications with: 

▪ Series 90, PACSystems, and VersaMax PLCs 

▪ Host computers running the Host Communications Toolkit or CIMPLICITY software 

▪ Computers running the TCP/IP version of the programming software CPU Features  

▪ High speed Boolean and non-Boolean processing provided by a 586-class 133MHz  processor 

▪ Two Ethernet ports: 10/100 Mbytes (one IP address) with a built-in, auto-sensing  Ethernet switch 

▪ Support for EZ Store Device allows you to download a program without a PC 

▪ 240KB of user memory Key Ethernet Features 

▪ Full PLC programming and configuration services 

▪ Periodic data exchange using Ethernet Global Data (EGD) and EGD commands to  read and write PLC and EGD exchange memory over the network 

▪ TCP/IP communication services using SRTP 

▪ Support for SRTP Client (Channels) 

▪ Modbus/TCP Server, supporting Modbus Conformance classes 0, 1, and 2. 

▪ Modbus/TCP Client, supporting Modbus Conformance classes 0, 1, and Function Codes 15, 22, 23, and 24 for Conformance class 2. 

▪ Remote PLC monitoring from a web browser 

▪ Comprehensive station management and diagnostic tools

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required