GE IS220PSCAH1A Serial Communication Input/Output Module

GE IS220PSCAH1A Serial Communication Input/Output Module

Part Number IS220PSCAH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockIS220PSCAH1A is a Serial Modbus Communication I/O Module manufactured by General Electric as a part of the Mark VIe series used in gas turbine control systems. The PS Series power supplies give you consistent, reliable, switched DC power at linear power supply prices. 

These power supplies use efficient switching technology to produce the most power in the smallest space while generating a minimum amount of heat. The constant-current short circuit protection limits the output current as the voltage is reduced to safely protect your control components from direct shorts and device failures. Once the short is corrected, the PS Series power supplies automatically resume supplying full-voltage power. Precisely regulated output power is suitable for battery charging applications. Extra-sturdy DIN rail mounts and removable plug connections make installation a breeze. Meeting UL/cUL 60950, 508, and 1604* (Class I, Div. 2), our PS-D (DIN-rail mounted) power supplies meet the standards required for practically any industrial control application. 

 FEATURES 2A - 24A at 24 VDC, 3.5A at 12 VDC Regulated switch mode type Low profile case Easy DIN-rail mounting Constant-current short circuit protection Low ripple and noise Selectable input voltage (115/230 VAC) High EMC immunity The Mark VIe Functional Safety System has been used for safety-critical applications. It is used in a wide variety of applications including steam and gas turbine power generation balance of (BoP) deep-sea drilling, desalination, gas compression, and other applications management systems. 

In functional safety systems, the Mark VIe controller serves as a gateway to the Mark VIeS safety controller. The controller is a standalone and single-board controller with scalable processing power. It includes built-in power supplies and requires no batteries or jumper settings. IONet data includes process inputs and outputs to the I/O packs.

FEATURES

2A - 24A at 24 VDC, 3.5A at 12 VDC

Regulated switch mode type

Low profile case

Easy DIN-rail mounting

Constant-current short circuit protection

Low ripple and noise

Selectable input voltage (115/230 VAC)

High EMC immunity

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.