GE IS230TCISH5C - DIN RAIL MODULE I/O MODULE

GE IS230TCISH5C - DIN RAIL MODULE I/O MODULE

Part Number IS230TCISH5C Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockIS230TCISH5C is a I/O Module developed by GE. It is a part of Mark VIe control system. Designed to operate as a DIN rail module, offering a versatile solution for integrating and managing various input and output functionalities. Within the module, a range of input and output functions can be configured and managed. These functionalities span from receiving and processing analog and digital signals to sending out control commands or triggering specific actions. This flexibility allows the module to cater to diverse requirements, adapting to the specific needs of different industrial applications. 

Features In addition to their primary functions, each I/O pack performs an essential secondary task by transmitting an identification message, commonly referred to as an ID packet, to the central main controller upon request. This packet contains a wealth of crucial information that aids in efficient management and monitoring. Specifically, it includes key details such as the hardware catalog number associated with the I/O board, the precise hardware revision, the unique barcode serial number of the board, as well as the catalog number and version of the firmware being utilized. 

To ensure accurate and reliable performance even in varying environmental conditions, both the processor board and data acquisition board within the I/O pack are designed to operate within a temperature range of -30C to 65C. This operational range is achieved through a mechanism of free convection cooling, which allows the system to effectively regulate its temperature without the need for active cooling methods. To maintain a high degree of precision in temperature monitoring, every I/O pack is equipped with a temperature sensor. This sensor provides temperature readings that are accurate within a margin of 2C. These temperature readings are valuable data points that are collected and stored within the system's database. Moreover, they can be effectively leveraged to generate alarms if temperature thresholds are breached. This proactive approach to monitoring temperature variations helps ensure that potential issues are identified and addressed promptly, mitigating the risk of overheating or other temperature-related concerns.Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.