GE Multilin UR-67H I/O Module, Digital Control & Monitoring Solutions

GE Multilin UR-67H I/O Module, Digital Control & Monitoring Solutions

Manufacturer:General Electric Multilin Model Number:UR-67H Module Type:Digital I/O Outputs:8 Form-A Digital Outputs Relay Compatibility:Universal Relay Series Weight:1.15kg Manufacturing Location:Markham, Ontario, Canada Software:EnerVista Input/Output Configuration:Up to 96 Contact Inputs and 64 Contact Outputs The GE Multilin UR-67H I/O Module is a versatile component designed for industrial automation and control systems. It offers a robust solution for managing and monitoring auxiliary equipment within power systems. 

 With its advanced digital input/output capabilities, the UR-67H ensures efficient communication between the relay and various devices, enhancing operational reliability and performance. Equipped with high-quality materials and precision engineering, this module ensures durability and longevity in harsh industrial environments. Its lightweight design facilitates easy installation and maintenance. Users can easily configure the UR-67H to suit their specific application needs, thanks to its flexible input/output configurations. This adaptability makes it suitable for a wide range of industrial control scenarios. Benefit from GE Multilin  comprehensive warranty coverage, providing peace of mind and protection from potential defects. Our customer support team is dedicated to ensuring your satisfaction and offering guidance throughout the product lifecycle. The GE Multilin UR-67H is an essential component for enhancing control and monitoring capabilities in industrial systems, offering seamless integration with Universal Relays.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module