GE SGLA36AT0600 | General Electric 3 Pole Circuit Breaker

GE  SGLA36AT0600 | General Electric 3 Pole Circuit Breaker

Product Description P/N: DS3800NPSM1E1D DESCRIPTION / SPECIFICATIONS Description The DS3800NPSM1E1D is a part of the Speedtronic Mark IV series of turbine control. This system was designed to automate turbine controls and protect the turbine against the dangers of unsafe working conditions. The DS3800NPSM1E1D is a power supply panel. Technical Specifications Brand General Electric Category PLCs/Machine Control Part Number DS3800NPSM1E1D Subcategory PC Board PLC/Add-On Board Information About DS3800NPSM1E1D The DS3800NPSM1E1D features three (3) inductors, which are also known as coils. These inductors are marked with the designator L, from L1 to L3. 

Two of these inductors are situated near the top of the DS3800NPSM1E1D. The third inductor is located below these. This last inductor is topped with a black cover. This inductor is connected to the surface of the board with 6 yellow wires. Two large silver diodes are positioned on the left side of the DS3800NPSM1E1D. These diodes are connected to the circuit board by two (2) black wires each. At the bottom left side of the DS3800NPSM1E1D there are two large transistors which are silver in color. Four (4) smaller transistors are placed on the DS3800NPSM1E1D. Each transistor is marked with the letter Q.

 In the center of the top of the DS3800NPSM1E1D is a large blue capacitor. This capacitor is standing upright on the surface of the circuit board. There are five (5) orange capacitors placed on the DS3800NPS1E1D. Many smaller capacitors can also be found on the surface of the circuit board. These capacitors are a variety of colors including yellow, red, and blue. All of the capacitors are labeled with the designator C. One (1) fuse is sitting on the left edge of the DS3800NPSM1E1D. 

Two (2) test points can be seen at the top right corner of the circuit board. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. 

The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).