SKLL36AT0800 | General Electric Molded Case Circuit Breaker

SKLL36AT0800 | General Electric Molded Case Circuit Breakervvvv

Product Description P/N: SKLL36AT0800 Description / Specifications Description The SKLL36AT0800 by General Electric is a robust molded case circuit breaker from the Spectra Series. It is configured as a three-pole, three-phase unit with an amperage rating of 800A and a voltage rating of 600V. This breaker features a high interrupting capacity of 65kA at 480V, making it suitable for applications requiring reliable overcurrent protection.

 It operates as a current-limiting device with 100% rating and utilizes a bolt-on mounting method, ensuring secure installation. Technical Specifications Part Number SKHA36AT0800 Manufacturer General Electric Family Spectra Series Pole 3 Amp 800 Volt 600 Phase 3 Category Molded Case / 3-Pole Connection Bolt-On Type SKHA Functions LSI - Long-Time, Short-Time and Instantaneous Protection Solid State AIC Ratings 50kA@480V Information About SKLL36AT0800 The SKLL36AT0800 is a molded case circuit breaker manufactured by General Electric under the Spectra Series. 

Designed as a three-pole (3P), three-phase (3PH) device, it operates at an amperage of 800A and a voltage rating of 600V. This breaker model boasts a high interrupting capacity of 65kA at 480V, indicating its capability to handle substantial fault currents. Key features include current limiting properties, ensuring effective protection by restricting peak current levels during faults. It is 100% rated, meaning it can continuously carry its full rated current without overheating or tripping under normal operating conditions. 

The bolt-on configuration facilitates secure installation and is particularly suited for reverse fed applications, enhancing versatility in various electrical setups. The SKLL36AT0800 is UL listed, affirming compliance with rigorous safety standards, crucial for applications where safety and reliability are paramount. It is equipped with an interchangeable RMS trip unit featuring Long-Time, Short-Time, and Instantaneous trip functions. These functionalities enable precise adjustment of trip settings based on specific load characteristics and protection requirements. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).