THQL1115AF2 | General Electric 15 Amp Arc Fault (AFCI) Circuit Breaker

THQL1115AF2 | General Electric 15 Amp Arc Fault (AFCI) Circuit Breaker

Product Description P/N: THQL1115AF2 Description / Specifications Description The THQL1115AF2 is a 15 Amp single pole combination arc fault (AFCI) circuit breaker manufactured by General Electric under the Type THQL family. Designed for use in GE residential Loadcentres, it operates at 120 volts with a plug-in connection type. The breaker measures 3 inches in height, 1 inch in width, and 3 inches in length. It is CSA approved and UL listed, ensuring compliance with safety standards for residential applications. 

 Technical Specifications Part # THQL1115AF2 Category Circuit Breaker Subcategory Load Center Circuit Breaker Interrupting Capacity Rating 10 kAIC Voltage 120/240 V Neutral Connection Pig Tail Trip Style Non-Interchangeable Frame Type Q-Line Amperage 15 A System Voltage 120 Vac, 120/240 Vac Poles 1 Trip Function LI Continuous Current Rated Standard 120 Vac Interrupting Rating 10 KAIC 120/240 Vac Interrupting Rating 10 KAIC Suitable for Reverse Feed Yes Information About THQL1115AF2 The THQL1115AF2 is a 15 Amp single pole combination arc fault (AFCI) circuit breaker manufactured by General Electric, designed for residential load centers under the Type THQL family. It is specifically engineered to enhance safety by detecting and mitigating arc faults, which can prevent electrical fires. This circuit breaker is essential in protecting residential electrical systems from dangerous arc faults that may occur due to damaged wiring, loose connections, or other issues. 

It features a plug-in design for easy installation and replacement, suitable for GE loadcentres commonly found in residential settings. With a rating of 15 Amps and operating at 120 Volts, the THQL1115AF2 meets stringent safety standards, including CSA and UL listings, ensuring compliance with electrical codes and regulations. Its compact dimensions of 3 inches in height, 1 inch in width, and 3 inches in length make it suitable for space-constrained installations while maintaining robust protection capabilities. As part of the GE Type THQL family, this circuit breaker integrates advanced arc fault detection technology, capable of distinguishing between harmless electrical arcs and potentially hazardous arc faults. 

This capability significantly reduces the risk of fire by promptly interrupting the circuit when an arc fault is detected, thereby safeguarding both property and occupants. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers.

 IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module