GE SR489-P1-HI-A20 Advanced Input Module for Industrial Control Systems

SR489-P1-HI-A20 Advanced Input Module for Industrial Control Systems

Technical Specifications:{ nput Type  igital  perating Voltage  4 V DC  aximum Load  0 mA  elay Contacts  89 Sensor Supply  emperature Range  40 to 60"C  roduction Tests  ielectric Strength 1.9 kV AC for 1 second or 1.6 kV AC for one minute, per UL 508 The GE SR489-P1-HI-A20 Input Module is specifically designed to enhance the functionality of industrial control systems by providing accurate analog current input handling. Featuring passive IRIG-B input with 50 k惟 impedance, it ensures reliable signal acquisition even under varying environmental conditions. The module boasts exceptional timing accuracy, ensuring precise operation without compromising on system responsiveness. 

 With support for 1 to 12 RTDs, it caters to diverse industrial applications requiring temperature measurement precision. Designed with user convenience in mind, the module incorporates an intuitive interface and is compatible with various power block durations for flexible application scenarios. Engineered for durability and reliability, the SR489-P1-HI-A20 is a critical component for enhancing the overall performance and safety of industrial control systems. The GE SR489-P1-HI-A20 Input Module is a sophisticated control system interface designed for industrial applications, offering seamless integration and enhanced operational efficiency. 

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).