GE SR750-P5-G5-D5-HI-A1-R Feeder Management Relay Industrial Control Precision & Efficiency

SR750-P5-G5-D5-HI-A1-R Feeder Management Relay Industrial Control Precision & Efficiency

Operating Voltage:240 V AC Current Rating:Up to 50 A Protection Types:Time overcurrent, frequency, and phase loss Communications Protocol:Modbus RTU Mounting Configuration:Panel mountable Relay Output:8 independent contact sets Environmental Rating:IP20 Weight:0.7 kg Dimensions:100 x 150 x 90 mm Introducing the GE SR750-P5-G5-D5-HI-A1-R, a sophisticated feeder management relay that merges advanced technology with reliability, specifically engineered for industrial applications. 

Its cutting-edge design ensures seamless integration into complex control systems, enhancing operational efficiency. Equipped with comprehensive protection modes including time-overcurrent, short-circuit, and ground-fault detection, the relay safeguards against potential disruptions, safeguarding your system from unexpected failures. Its robust communication protocol ensures reliable data transmission, facilitating seamless coordination within your network. Engineered for durability, the relay operates within a wide temperature range (-40"C to +70"C), making it suitable for various industrial environments. The high insulation resistance ensures reliable operation even in challenging conditions, guaranteeing uninterrupted service. With its compact size (100mm x 100mm x 35mm), the GE SR750-P5-G5-D5-HI-A1-R offers space-efficient installation options. 

It boasts two sets of normally open relay contacts, providing flexible control over your system  circuits. This versatile feature allows for customization based on specific application requirements. Backed by GE  commitment to quality, the SR750-P5-G5-D5-HI-A1-R is designed to meet the stringent demands of industrial settings. It combines precision engineering with user-friendly operation, ensuring that your control systems run smoothly, efficiently, and safely. The GE SR750-P5-G5-D5-HI-A1-R is a high-performance feeder management relay designed for industrial control systems. It offers precise control and enhanced protection for distribution feeders, ensuring optimal system performance and reliability. 

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).