THQP220 | General Electric 20 Amp 1/2" Circuit Breaker

THQP220 | General Electric 20 Amp 1/2" Circuit Breaker

Product Description P/N: THQP220 Description / Specifications Description The THQP220 is a 2-pole circuit breaker manufactured by General Electric, belonging to the THQP (Spacesaver) series. Designed as a smaller, more cost-effective solution, THQP breakers are half the width of standard breakers, enabling compatibility with smaller load centers and providing space and cost savings. Operating at 20 Amps and 240 Volts, it features a plug-in connection suitable for single-phase applications. 

 Technical Specifications Part # THQP220 Category Circuit Breaker Subcategory Molded Case Circuit Breaker Amperage Rating Amperage Rating 20 A Application Thermal Magnetic Brand Name Q-Line (Plug-In) Commodity Code 3310 Concatenated Invoice Description THQP 2 POLE 120/240V 10K IC 20 AMP Connection 14-8 kcmil / 12-8 kcmil Description GE THQP220 2P 20A 120/240 PLG-IN CB Frame Q-Line Interrupt Rating 10kA@120 Vac / 10kA@120/240 Vac Invoice Description (MFR) THQP 2 POLE 120/240V 10K IC 20 AMP Load Rating HACR Number Of Poles 2 Pole Product Name Plug-In Circuit Breaker Safety Data Sheet (SDS) Flag N Voltage Rating 120/240V Information About THQP220 

 The THQP220, manufactured by General Electric, is a 2-pole circuit breaker belonging to the THQP (Spacesaver) series. Positioned as a smaller, more efficient alternative, THQP breakers are half the width of standard models, enabling compatibility with smaller load centers and facilitating significant space and cost savings. Despite their reduced size, THQP breakers maintain identical design standards to standard GE breakers. Designed for integration into GE residential panels, the THQP220 operates at 20 Amps and 240 Volts, catering to single-phase applications. Featuring a plug-in connection, it offers straightforward installation and compatibility with existing systems. This circuit breaker is equipped with an interrupting rating of 10000 Amperes, ensuring reliable protection against overloads and short circuits. 

With dimensions measuring 3 inches in height, 1 inch in width, and 3 inches in length, it conforms to standard specifications for residential circuit breakers. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module