THQL1120 | General Electric 1 Pole Circuit Breaker

THQL1120 | General Electric 1 Pole Circuit Breaker

Product Description P/N: THQL1120 Description / Specifications Description The General Electric THQL1120 is a 1-pole circuit breaker designed for residential panels within GE's THQL series. Manufactured by General Electric, it operates at 20 Amps and 120 Volts, featuring a plug-in connection suitable for single-phase applications. The breaker has an interrupting rating of 10000 Amperes, ensuring effective protection against overloads and short circuits. With dimensions measuring 3 inches in height, 1 inch in width, and 3 inches in length, it conforms to standard specifications. 

As an authentic General Electric product, it is CSA approved and UL listed, meeting rigorous safety and quality standards. Technical Specifications Part # THQL1120 Category Circuit Breaker Subcategory App/Comm Circuit Breaker Interrupting Capacity Rating 10 kAIC Voltage 120/240 V Trip Style Non-Interchangeable Frame Type Q-Line Amperage 20 A System Voltage 120 Vac, 120/240 Vac Poles 1 Trip Function LI Continuous Current Rated Standard 120 Vac Interrupting Rating 10 KAIC 120/240 Vac Interrupting Rating 10 KAIC Suitable for Reverse Feed Yes Long Time Fixed Instantaneous Fixed Protective Relays No Current Metering No Special Markings HACR, SWD GSA Compliance Yes Information About THQL1120 

 The General Electric THQL1120 is a 1-pole circuit breaker belonging to the THQL series, intended for residential panels. Manufactured by General Electric, it is identified by catalog number THQL1120, with an alternative number THQL120. Operating at 20 Amps and 120 Volts, it is designed for single-phase applications. Featuring a plug-in connection, it facilitates straightforward installation. 

 This circuit breaker possesses an interrupting rating of 10000 Amperes, ensuring effective protection against overloads and short circuits. With dimensions measuring 3 inches in height, 1 inch in width, and 3 inches in length, it adheres to standard specifications for residential circuit breakers. As an authentic General Electric product, it is CSA approved and UL listed, attesting to its compliance with safety and quality standards. 

The THQL1120 is suitable for a variety of residential electrical applications, offering reliable performance and ease of installation. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module