TQD22125WL | General Electric Circuit Breaker

TQD22125WL | General Electric Circuit Breaker

Product Description P/N: TQD22125WL Description / Specifications Description The General Electric TQD22125WL is a circuit breaker designed for electrical applications. It belongs to the General Electric Q-Line and is identified as Type TQD. Featuring 2 poles and intended for single-phase use, it has a current rating of 150A at 240V. The circuit breaker offers an interrupting capacity of 10kA at 240V and is equipped with a non-interchangeable trip unit. Technical Specifications Part Number TQD22125WL Manufacturer General Electric Family Q-Line Pole 2 Amp 125 Volt 240 Phase 1 Category Molded Case / 2-Pole Connection Feed-Thru Type TQD Functions LI - Long-Time and Instantaneous Protection Thermal Magnetic AIC Ratings 10kA@240V Information About TQD22125WL 

 The General Electric TQD22125WL is a circuit breaker designed to meet the demands of electrical applications within various settings. As part of the General Electric Q-Line, it falls under the Type TQD classification. Featuring 2 poles and intended for single-phase usage, it operates at a current rating of 150A with a voltage capacity of 240V. The TQD22125WL circuit breaker is designed to provide reliable circuit protection in various electrical systems. Equipped with a thermal magnetic mechanism, it offers effective protection against overcurrent events. The inclusion of a non-interchangeable trip unit ensures consistent and reliable performance. Featuring line and load side lug terminals, this circuit breaker facilitates secure electrical connections. 

It operates within standard interrupting capacity, suitable for a wide range of applications. With a temperature rating of 40 degrees Celsius, it can withstand typical operating conditions. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module