Watlow CLS200 Compact Loop System
Watlow CLS200 Compact Loop System
DESCRIPTION
The Watlow Anafaze CLS200 series is a powerful line of controllers, combining performance and flexibility with compact design. The 4, 8, and 16 loop versions provide complete control solutions for a broad range of applications. Support for multiple types of sensor inputs is available, including thermocouples, RTDs, linear voltage, current and frequency. Each controller can operate as a stand-alone system, and includes built-in serial communications for computer interface and data acquisition. Optional programmable ramp and soak features allow complex batch processing and sequencing. An enhanced features option offers cascade control, ratio control, differential control, process variable retransmit, and remote analog set point.
Features and Benefits
PID control of up to 16 heat and cool loops
• Minimal panel space per loop
• Reduced installation time
• More reliable: fewer parts means fewer failures
Auto-tune
• Less time tuning
• Achieve excellent control with less expertise
Menu-guided operation with full text display
• Setup controller quickly
• Easy to operate
Eight jobs stored and recalled
• Quick to change from one process to another
Multiple and mixed inputs
• Easy to change sensor types at the last minute
• Less to learn, less inventory
Sensor failure detection
• Reduce time troubleshooting reversed, shorted and open sensors
High/low process and deviation alarms for each input
• Configure alarms as needed to integrate with PLC or other control elements
34 digital outputs
• Flexible configuration: use outputs as needed for control and alarms
EIA/TIA-232 and 485 communications
• Use software to configure and operate
• Integrate with other controllers and software
Firmware Options
Choose firmware with the features needed for the application:
• Standard—includes closed-loop PID control, auto-tune, alarms, job memory, and failed sensor detection.
• Extruder— includes the standard firmware features, with PID control specifically adapted for plastic extruders.
• Ramp and Soak—includes the standard firmware features with the addition of ramp and soak and process variable retransmit. Each channel can be configured for standard PID control or ramp and soak operation. Unused control outputs on any channel can be configured for retransmit.
email:1583694102@qq.com
wang@kongjiangauto.com