YASKAWA AC Drive-J1000 Option RS-232C Interface

YASKAWA AC Drive-J1000 Option RS-232C Interface

PRODUCT OVERVIEW

Drive: Yaskawa AC Drive -J1000 Series 

Option: Yaskawa AC Drive -J1000 RS-232C Interface Option

YASKAWA J1000 Series Inverter Overview

The YASKAWA AC Drive-J1000 is a compact V/f control inverter designed for speed adjustability, power saving, and energy conservation in small machinery. This series of inverters is available in a wide range of models for application scenarios with different power ranges and voltage levels. It is widely used in the automation control field for its compact size, high performance and easy operation.

Communication Interface Overview

In the field of industrial automation, inverters usually need to communicate with various devices to achieve remote monitoring, parameter setting and data acquisition, etc. YASKAWA J1000 series inverters usually support a variety of communication protocols and interfaces to meet the needs of different users.

Receiving

Confirm the packaging after receiving the RS-232C Interface Option. If the wrong model is received or the RS-232C Interface Option does not function properly, contact your supplier. 

Components packaged with the option: 

• The RS-232C Interface for copy unit/PC communication (SI232/J or SI-232/JC) 

• Technical manual

About this Product

The RS-232C Interface Option allows the drive to be connected to a network or external device.

Possible connected devices include: 

• LED Operator 

• Personal computer using DriveWizard Plus 

• USB Copy Unit

These devices can be used to edit, view, and copy parameter settings in the drive.SI-232/JC can be more easily connected and disconnected than SI232/J. This is useful when copying parameter settings between multiple drives.

Damage to Equipment 

Use only Yaskawa connection cables or recommended cables. 

Failure to comply may cause the drive or option to function incorrectly. 

Properly connect the connectors. 

Failure to comply may prevent proper operation and possibly damage equipment. 

Do not exceed communication cable bend radius specifications. 

Failure to comply may result in broken wires or loose connections.

Fault

Fault Name：Digital operator connection fault

Cause：LED operator is not properly connected to the drive or cables are damaged

Possible solution：

• Check the connection between the LED operator and the drive 

• Replace the cable if damaged 

• Turn off the drive input power and disconnect the LED operator 

• Next reconnect the operator and turn the drive input power back on

Specifications

Storage/ Installation Area：Indoors (an area free from oil mist and dust)

Ambient Temperature：-10 to +50°C

Humidity：95% RH or less with no condensation

Storage Temperature：-20 to +60°C allowed for short-term transport of the product

Altitude：1000 m or less