GE ds215uciag1azz05a Core Motherboard

GE ds215uciag1azz05a Core Motherboard

Part Number ds215uciag1azz05a Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS215UCIAG1AZZ05A is a UC2000 Core Motherboard manufactured and designed by General Electric as part of the Mark V Series used in GE Speedtronic Gas Turbine Control Systems. It features one microprocessor and several PROM modules. It also has one jumper and one connector for attaching other boards. A modular-type connector allows for the connection of a daughter card to the board. 

The daughter card is physically attached to the board via standoffs on the board, and the modular connector offers power and signal connections. Because the use of a daughter card requires more space in the board cabinet, it is standard practice to replace it in the same location when replacing it. The board's 10 LEDs provide a health status and signal if an error occurs. When the drive is operational, the LEDs are visible, making it easy for the operator to locate the board and determine the state of the board by determining the pattern of the flashing LEDs. When normal processing is taking place, the LEDs flash off and on in a clockwise direction from left to right. When an error code is generated, the LEDs flash in a specific sequence to display the error code.

SPECIFICATIONS:

Part Number: DS215UCIAG1AZZ05A
Manufacturer: General Electric
Series: Mark V
Product Type: UC2000 Motherboard
Number of channels: 12
Common Mode Voltage Range: +5 V dc
Maximum Lead Resistance: 15Ω
Analog output current: 0-20 mA
Operating temperature: -30 to 55 °C
Size: 8.26 cm high x 4.18 cm
Repair: 3-7 Day
Availability: In Stock
Weight: 2 lbs
Country of Origin: United States

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink