GE DS215UDSAG1A Circuit Board

GE DS215UDSAG1A Circuit Board

Part Number DS215UDSAG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS215UDSAG1A is a Display/Keyboard Interface Board with EPROM manufactured and designed by General Electric as part of the Mark V Series used in GE Speedtronic Gas Turbine Control Systems. A Display/Keyboard Interface Board with EPROM (Erasable Programmable Read-Only Memory) is a hardware component that facilitates communication between a display unit, a keyboard, and a microcontroller or computer system. The EPROM stores firmware or software instructions that control the operation of the interface board. 

Here's a high-level overview of the components and functionality of such a board: Display Interface: The board provides a means to connect and control a display unit, such as an LCD (Liquid Crystal Display) or LED (Light-Emitting Diode) panel. It includes the necessary drivers and circuitry to interface with the display unit and display text, graphics, or other visual information. Keyboard Interface: The board includes circuitry to connect and interact with a keyboard or keypad. It may utilize a matrix or other keyboard scanning technique to detect keypresses and send corresponding signals to the microcontroller or computer. EPROM: The EPROM is a non-volatile memory chip that stores the firmware or software instructions for controlling the display and keyboard interfaces. The EPROM is programmable, allowing the firmware to be written during the manufacturing process or updated later if necessary. 

 Microcontroller/Computer Interface: The interface board typically connects to a microcontroller or computer system using standard communication protocols such as UART (Universal Asynchronous Receiver-Transmitter), SPI (Serial Peripheral Interface), I2C (Inter-Integrated Circuit), or parallel interfaces. This connection enables the exchange of data and commands between the display/keyboard interface board and the controlling device. Power Supply and Signal Conditioning: The board may include voltage regulation and signal conditioning circuits to ensure proper power supply levels and signal integrity for the display and keyboard components.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux