GE Fanuc 3VTVZ590CD001 Central Control Module

GE Fanuc 3VTVZ590CD001 Central Control Module

Module Type:Central Control Model Number:3VTVZ590CD001 Series:Fanuc Power Consumption:30W Operating Temperature Range:-10"C to +55"C Storage Temperature Range:-20"C to +70"C Dimensions (WxHxD):140mm x 120mm x 50mm Weight:0.3kg The GE FANUC 3VTVZ590CD001 Central Control Module is a cutting-edge solution for industrial control systems, offering seamless integration with existing GE Fanuc systems for a smooth upgrade path without compromising on performance or functionality. Equipped with a powerful 300 MHz processor and ample memory, this module ensures efficient operation even in the most demanding applications. 

Its embedded open architecture supports a wide range of programming languages, enhancing flexibility and compatibility. Featuring an integrated 10/100 Mbps Ethernet interface, the module facilitates rapid data transfer and communication within the factory floor, optimizing workflow and productivity. With 32 channels of 24 Volt output, it caters to diverse control requirements across various industries. Designed with durability and reliability in mind, the GE FANUC 3VTVZ590CD001 Central Control Module is built to withstand harsh industrial environments, ensuring continuous operation and minimal downtime. Its modular design allows for easy expansion and customization to meet evolving business needs. 

 Our commitment to quality and innovation is reflected in the comprehensive support and service offered with every purchase, including access to detailed documentation, training resources, and a dedicated customer support team. Trust GE FANUC for reliable and scalable solutions that drive operational excellence in your manufacturing processes. The GE Fanuc 3VTVZ590CD001 Central Control Module is an advanced component designed for precise process control in industrial automation systems. It ensures seamless integration and enhanced operational efficiency.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module