GE FANUC A06B-0753-B390#3000 Servo Motor, High-Speed Precision Control

A06B-0753-B390#3000 Servo Motor, High-Speed Precision Control

Type:AC Servo Motor Model:A06B-0753-B390#3000 Rated Voltage:200V AC Nominal Current:3A Max Speed:6000 RPM Max Torque:22 Nm Brake Type:DC Control Interface:EtherCAT Cooling Method:Natural Air Cooling The GE Fanuc A06B-0753-B390#3000 servo motor is designed for high-demand industrial applications requiring precise motion control. Its compact size and lightweight construction make it ideal for space-constrained environments without compromising on performance. Equipped with advanced magnetic pole shapes and optimized mechanical design, this motor ensures smooth, ripple-free rotation, delivering consistent performance across a wide range of speeds and loads. 

 With its superior acceleration capabilities, the A06B-0753-B390#3000 servo motor accelerates faster than traditional motors, reducing cycle times and increasing productivity in manufacturing processes. The motor is engineered with a robust rotor shape that supports its light weight and high efficiency, making it suitable for a variety of applications including CNC machines, packaging lines, and robotics. Featuring a high-resolution encoder for precise feedback, this servo motor ensures accurate positioning and repeatability, critical for achieving high-quality outputs in precision manufacturing tasks. This GE FANUC A06B-0753-B390#3000 servo motor is designed for high-precision applications, featuring a robust build and optimized performance for enhanced efficiency.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).