GE DS200QTBAG1A Terminal Board

GE DS200QTBAG1A Terminal Board

Part Number DS200QTBAG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200QTBAG1A is an RST Termination Board and is part of the GE Speedtronic Mark V gas turbine control system. The QTBA board contains the IONET and COREBUS, communication connections, and screw terminations for LDTV Excitation, servo inputs, pulse rate inputs, and a WATT / VAR transducer input. QTBA is located in locations L6 R, S, and T - Cores. The QTBA terminal boards land the signal used by the TCQC board in the respective cores.

This DS200QTBAG1A printed circuit board was originally manufactured, as alluded to above, by General Electric, specifically for placement in their Mark V Turbine Control System Series. The Mark V Series that this DS200QTBAG1A product offering belongs to is considered a legacy product series, as it is obsolete given an eventual manufacturing discontinuation in the many years following its initial release. While the Mark V Series that this DS200QTBAG1A Board belongs to is considered now-obsolete due to its legacy status, it is something of a recent product series offering, as it exists as one of the final General Electric product series to incorporate the trusted automation brand's patented Speedtronic control system technology into its various iterations and revision versions of its product offerings. This DS200QTBAG1A printed circuit board is definable functionally as an RST Termination Board or simply as a Termination Module, based on both of these functional descriptions' insertions in relevant GE Mark V Turbine Control Systems Series instructional manual materials. While this is true, this specific DS200QTBAG1A product offering is not the original device of its Mark V Series functional role; that would be the DS200QTBAG1 parent Termination Module not making use of this DS200QTBAG1A product's singular A-rated functional product revision.

Hardware Tips and Specifications

The GE RST Termination Board DS200QTBAG1A features 2 terminal blocks with terminals for 72 signal wires in each. It also contains 1 40-pin connector. The ID for the 40-pin connectors is JFF. It also is populated with 1 serial connector. The GE Termination Board DS200QTBAG1A is also populated with 1 34-pin connector. The ID for the 34-pin connector is JGG. Each of the specific connectors in the assembly of this DS200QTBAG1A Mark V Series product offering is listed in the DS200QTBAG1A instructional manual material inserted in the manuals tab above for your convenience. This DS200QTBAG1A instructional manual describes the specific applications of each DS200QTBAG1A connector as follows:

The JAI COREBUS Connector

The JAJ COREBUS Connector

The JEE STCA Board I/O Signals Connector

The JGG TCQC Board Various Signals Connector

The JFF LVDT/R and Servo Output Signals Connector

The JRS RS-232 Monitor Signals Connector

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).