GE DS200TBCBG1A Termination Module

GE DS200TBCBG1A Termination Module 

Part Number DS200TBCBG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200TBCBG1A is a Termination module developed by GE. Location seven of the R5 core houses the Termination Module RTD and 4-20 mA Input (TBCB). The TBCB terminal board receives RTD and mA input signals. Eight of the 4 -20 mA input signals can be configured as 0 -1 mA input signals via hardware jumpers. In the R5 core, the signals connected to the TBCB terminal board are written to the TCCB board. 

 DS200TBCBG1A Features The board can be installed among other I/O control boards in a Mark V turbine control cabinet. Within the cabinet, there are four portions of these boards. Within an I/O control section, there are 9 total slots, and the TBCB board normally occupies one of the bigger slots below a sequence of 5 smaller boards. The board is also known as an RTD and 4-20 mA Input Termination Module (TBCB). This board is a part of the R5> core. The input signals received by this board are transmitted to the TCCB board, where they are written on the board. The TCCB board can also be found in the R5 core.

 A total of eight of the standard input signals can be transformed to 0-1 mA input signals. There is no software that needs to be configured on the board, however, there are hardware options. The DCOM must be connected to the BJ1 to BJ22 input signals. Signals 15-22 are transformed to a 0-1mA current range using the BJ23 to BJ30 input signals. DS200TBCBG1A Connections JHH - In the R5 core, writes the mA input signals to the TCCB board. JII - In the R5 core, writes RTD signals to the TCCB board. Configuration of TBCB Hardware BJ1 to BJ22 - Connects mA input signals #1 to #22 to DCOM. BJ23 through BJ30 - Sets mA input signals #15 through #22 to a current range of 0 -1 mA or 4 -20 mA.

Hardware Tips and Specifications

The DS200TBCBG1A can be mounted within a Mark V turbine control cabinet with other I/O control boards. There are four sections of these boards within the cabinet. There are 9 total slots within an I/O control section and the TBCB board typically takes up one of the larger slots below a series of 5 smaller boards. The DS200TBCBG1A is also called a Termination Module RTD and 4-20 mA Input (TBCB). This board functions within the core. This board uses the input signals that it receives to transmit them to the TCCB board where they are written on to the board. The TCCB board is also located within the core. A total of eight of the regular input signals have the ability to be converted to 0-1 mA input signals.  This DS200TBCBG1A printed circuit board product offering communicates with other necessary Mark V Series products within the greater Mark V Series automated drive assembly through the use of several specific styles of connectors, as revealed in the DS200TBCBG1A instructional manual made available in our manuals tab above. This DS200TBCBG1A printed circuit board or PCB for short's specific voltage suppression strategy involves the incorporation of a standard set of voltage-limiting hardware components such as transistors, capacitors, and resistors into its normal Mark V Series assembly. This DS200TBCBG1A printed circuit board product offering from General Electric is not the originally-developed product of its specific Mark V Series functionality; that would be the DS200TBCBG1 parent Termination Module missing this DS200TBCBG1A Device's singular, A-rated functional product revision.

The DS200TBCBG1A does not have any specific software that needs to be configured but it does have hardware configurations. The BJ1 to BJ22 input signals need to be connected to the DCOM. The BJ23 to BJ30 input signals are where signals 15-22 are converted to 0-1mA current range. Please refer to Instruction Manual GEH-6353B for more information on the specific installation of the input signals for the DS200TBCBG1A. Given this DS200TBCBG1A product offering's attribution to the now-defunct Mark V Turbine Control System Legacy product series, it should come as no surprise that this DS200TBCBG1A PCB's originally-introduced instructional documentation is largely unavailable on the internet. With this in mind, the DS200TBCBG1A functional product number itself can be considered a primary source of DS200TBCBG1A Board hardware component and component specification information; coding for these details in a series of consecutive functional naming segments. For instance, the DS200TBCBG1A functional product number begins with the dual-functional DS200 series tag that delegates this DS200TBCBG1A PCB's normal Mark V Series assembly as well as its domestic original manufacture location. Some of the other relevant hardware information revealed through this DS200TBCBG1A product's functional product number includes its:

TBCB functional product abbreviation

Normal PCB coating style

Group one Mark V Series product grouping

A-rated functional product revision