GE ds215udsag1azz01a Firmware Board

GE ds215udsag1azz01a Firmware Board 

Part Number ds215udsag1azz01a Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS215UDSAG1AZZ01A is a UDSAG1 Circuit Board and Firmware under Mark V series. One 80196 microprocessor and many erasable programmable read-only memory (EPROM) modules are included in the board. There are additionally 21 4-character displays and 32 LEDs on the GE EX2000 Firmware Board DS215UDSAG1AZZ01A. The instruction code and other code that the microprocessor utilizes to process information is stored in EPROM modules. The board receives signals via the signal cables attached to the board. 

The signals are processed by the microprocessor, which then sends the updated signals to other boards or devices in the drive. In addition, the display modules display information on the board's activity, and the LEDs also give information. The information can be viewed from the drive board cabinet while the drive is running. When a board is replaced, the optimal result is for the replacement board to function exactly like the one it is replacing. 

As a result, the drive may start processing as it was before the replacement, and there will be no further delays at the site. One key worry is that the replacement board's instruction code and firmware on the EPROM modules must be identical to the defective board's in order for the board to function properly. It is, however, simple to transfer the modules from the old board's EPROM sockets to the replacement board's sockets. On one end, insert a tool into the gap between the module and the socket. Then, to release the module, lift up the tool. Rep the procedure on the opposite end of the module.

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider