EPRO 330106-05-30-10-02-00 Reverse Mount Probes

EPRO 330106-05-30-10-02-00 Reverse Mount Probes

Product Overview

EPRO 330106-05-30-10-02-00Reverse Mount Probes are eddy current sensor probes for measuring vibration, displacement and other parameters of rotating machinery. The probes are reverse mounted, i.e., the probes are mounted in the opposite direction to the conventional mounting, and are typically used where space is limited or where a special mounting angle is required.

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition

Main features

Reverse mounting: the probe is specially designed to allow reverse mounting on the measured object to meet special application requirements.

High accuracy: Highly accurate measurement capability, which can accurately reflect the vibration or displacement of the object to be measured.

High Temperature Resistance: Usually can work stably under high temperature environment, suitable for all kinds of harsh industrial environments.

Long service life: Made of high quality materials and advanced technology, it has a long service life.

Application Scenario

Vibration monitoring of turbines, compressors, fans, pumps and other rotating machinery.

Displacement measurement of bearings, gearboxes and other components.

Condition monitoring of equipment in petroleum, chemical, electric power, metallurgy and other industries.

Precautions

Read the product manual carefully before installation to ensure proper installation and use.

Regularly check the installation status and working performance of the probe, and maintain and replace the damaged parts in time.

Pay attention to avoid the probe being subjected to mechanical shock or excessive vibration, so as not to affect the measurement accuracy and life.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

More Related Models

epro 330016-14-01-03-00-00-01

epro 330100-90-00

epro 330100-90-01

epro 330103-00-03-05-02-05

epro 330103-00-04-10-02-00

epro 330103-00-06-10-02-00

epro 330104-00-05-10-02-00

epro 330104-00-05-10-02-CN

epro 330106-05-30-10-02-00