Epro 330103-00-03-05-02-05 Proximity Transducer System

Epro 330103-00-03-05-02-05 Proximity Transducer System

Product Overview.

The Epro 330103-00-03-05-02-05 Proximity Transducer System is an eddy current sensor system for measuring displacement changes on metal surfaces. Such systems are widely used in the power, petroleum, chemical, and metallurgical industries, as well as in scientific research units, to monitor parameters such as vibration, displacement, key phase, and rotational speed of large rotating machinery (e.g., steam turbines, hydraulic turbines, compressors, etc.).

Main Features

High Accuracy: Usually has high accuracy and can accurately measure small displacement changes.

Multi-functional: not only limited to vibration measurement, but also can be used for a variety of parameters such as displacement, key phase and speed measurement.

Widely used: applicable to a variety of industrial environments and equipment, especially in high temperature and harsh conditions can also be stable operation.

Conformity with standards: It may conform to international or industry standards, such as API 670 of the American Petroleum Institute.

System Components

Similar systems from Bently Nevada typically consist of the following components:

Probe: Directly contacts the object to be measured and senses changes in its displacement.

Extension Cable: Connects the Probe to the Preamplifier and transmits the signal.

Preamplifier: Amplifies and processes the signal from the Probe and converts it into a processable electrical signal.

Usage Scenarios

Vibration monitoring: Monitoring the vibration of rotating machinery to prevent malfunctions.

Displacement measurement: Measures axial or radial displacement of shafts to ensure that equipment operates within safe limits.

Key phase and rotational speed measurement: Provide accurate key phase and rotational speed information for equipment synchronisation control and performance analysis.

Precautions

Installation: The probe and preamplifier should be installed correctly according to the product manual to ensure accurate measurement.

Calibration: Calibrate the sensor system periodically to ensure measurement accuracy.

Maintenance: Regularly check the working status of the system components and replace damaged or aged components in time.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider