GE HE693ADC415E Analog Input Module, for Industrial Automation Control

HE693ADC415E Analog Input Module, for Industrial Automation Control

Type:Analog Input Module Brand:General Electric Model:HE693ADC415E Operating Voltage Range:5-30 VDC Number of Channels:16 Input Current Range:0.5 mA to 20 mA Input Sensitivity:卤1 mV/V Environmental Temperature Range:-20"C to +60"C Humidity Range:5% to 95% non-condensing Dimensions:90 mm x 90 mm x 50 mm Weight:0.12 kg Integrating the GE HE693ADC415E Analog Input Module into your industrial control system ensures precise and reliable data acquisition, critical for efficient process monitoring and control. This module is engineered to withstand harsh industrial environments, offering exceptional accuracy within its wide range of operating temperatures and humidity conditions. 

 With 16 channels capable of measuring up to 20 mA current, this module supports diverse industrial applications, from process control to machine diagnostics. Its high input sensitivity and low offset drift make it ideal for sensitive measurement tasks. The module  robust design includes features like over-voltage protection and isolation, ensuring the safety and longevity of your system components. Its compact size and lightweight construction facilitate easy installation and integration into existing systems. To optimize performance, the GE HE693ADC415E Analog Input Module can be configured with various settings through the integrated programming interface, allowing users to tailor it to specific application requirements. For seamless operation, consider pairing this module with compatible GE PLCs and other industrial automation equipment, creating a comprehensive solution for enhanced productivity and reliability in manufacturing and process industries. The GE HE693ADC415E Analog Input Module is designed for precise data acquisition in industrial automation systems. It offers high-resolution analog-to-digital conversion capabilities, enabling seamless integration with various control systems and enhancing operational efficiency. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module