GE IS200TBTCH1B Thermocouple Input Terminal Board

GE IS200TBTCH1B Thermocouple Input Terminal Board

Part Number IS200TBTCH1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockGeneral Electric's IS200TBTCH1B thermocouple board is a type of printed circuit board or PCB. This board was developed by General Electric and is a part of the Mark VI series. The Mark VI Speedtronic and the remainder of the Mark series were designed to manage and automate gas and steam turbine operations in industrial systems. Since 1969, when the first Mark I items were introduced, these products have been in use. 

 The IS200TBTCH1B is a very long printed circuit board with a variety of components ranging in size from extremely large to extremely small. Two long black terminal blocks are the most visible components on the IS200TBTCH1B. There are a total of 48 terminals in these terminal blocks, each with twenty-four terminals. These terminals are all made of silver metal and are cube-shaped. They've all been labeled with numbers ranging from one to forty-eight written in white ink. Two jack connector ports labeled JA1 and JB1 are the IS200TBTCH1B's second-largest electrical components. 

Several lengthy lines of very small components occupy the middle of the IS200TBTCH1B. This section contains two long lines of blue resistors that extend nearly the whole vertical length of the IS200TBTCH1B. In the center of the IS200TBTCH1B are two equally long lines of little silver capacitors that alternate with the rows of resistors. On the right side of this huge collection of components is a lengthy line of components labeled with the letter L.THERMOCOUPLE TERM. 

SPECIFICATIONS:

Part Number: IS200TBTCH1B
Manufacturer: General Electric
Series: Mark VI
Product Type: Thermocouple Input Terminal Board
Number of channels: 24 channels
Thermocouple types: E, J, K, S, T
Span: -8 mV to +45 mV
Operating temperature: 0 to +45°C
Size: 15.9 cm high x 17.8 cm
Repair: 3-7 Day
Availability: In Stock
Country of Origin: United States
Manual: GEH-6421M

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink