GE ds2020dacag1 xcitation Controlle

GE ds2020dacag1 xcitation Controlle

Part Number ds2020dacag1 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockGeneral Electric Speedtronic Mark V DS2020DACAG1 is an AC/DC Power Conversion Module and is part of the drive control hardware. The DS2020DACAG1 module comes with four mounting brackets (two on each side) that can be used to secure it in place. This module should be vertically floor-mounted within the cabinet to which it is assigned. Bolts can be used to anchor the DS2020DACAG1 to a surface. 

On the module, there is a collection of six wires that are joined with zip ties. The wires will not tangle because of the zip ties. These wires connect to a power supply on the module's bottom. Two additional 115V connectors are labeled J2 and JTX1 on the module's top metallic plate. A blue electro capacitor is located on the underside of the top plate. When this board is powered on, a green LED indicator light will glow in the top left corner of the module. A transformer assembly is also known as the DS2020DACAG1. The VAC input power is converted to VDC output power using this module. This module should only be used at temperatures ranging from -30 to +65 degrees Celsius with a non-condensing humidity of 5 to 95 percent. This module should be protected in a chassis or an electrical cabinet because it is not designed for external use.

The Series 90* -30 CPU374 PLUS provides a built-in enhanced Ethernet interface that  provides TCP/IP communications with: 

▪ Series 90, PACSystems, and VersaMax PLCs 

▪ Host computers running the Host Communications Toolkit or CIMPLICITY software 

▪ Computers running the TCP/IP version of the programming software CPU Features  

▪ High speed Boolean and non-Boolean processing provided by a 586-class 133MHz  processor 

▪ Two Ethernet ports: 10/100 Mbytes (one IP address) with a built-in, auto-sensing  Ethernet switch 

▪ Support for EZ Store Device allows you to download a program without a PC 

▪ 240KB of user memory Key Ethernet Features 

▪ Full PLC programming and configuration services 

▪ Periodic data exchange using Ethernet Global Data (EGD) and EGD commands to  read and write PLC and EGD exchange memory over the network 

▪ TCP/IP communication services using SRTP 

▪ Support for SRTP Client (Channels) 

▪ Modbus/TCP Server, supporting Modbus Conformance classes 0, 1, and 2. 

▪ Modbus/TCP Client, supporting Modbus Conformance classes 0, 1, and Function Codes 15, 22, 23, and 24 for Conformance class 2. 

▪ Remote PLC monitoring from a web browser 

▪ Comprehensive station management and diagnostic tools

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.