193X741ABG01 | General Electric Power Supply Board

193X741ABG01 | General Electric Power Supply Board

Product Description P/N: 193X741ABG01 Description / Specifications Description The 193X741ABG01 is a Power Supply Board manufactured by General Electric. This board is designed to provide power regulation and distribution for various electronic systems. It includes multiple power connectors and integrates components such as capacitors, resistors, and inductors for stable power output. The board's specific applications and configurations are detailed in technical documentation provided by General Electric. 

 Technical Specifications Condition New / Never Used Surplus Part Number 193X741ABG01 Category Power Supply Subcategory Dual Output Card Manufacturer General Electric Information About 193X741ABG01 The 193X741ABG01 is a dual output power supply card produced by General Electric for use in their DC drive systems, including the SCR Drive, Speed Variator Drive, and other compatible drive systems. It is designed for applications involving general-purpose drives, test stand systems, or machine tool control. The card features a wide front panel in blue and silver. A rounded handle is attached to the bottom edge of the front panel, facilitating the insertion and removal of the printed circuit board (PCB) from its rack system. The PCB and front panel are secured by two screws inserted through a top-hat flange located on the bottom edge of the front panel and the front edge of the PCB, along with a reinforcing bar on the top edge of the board. 

 The 193X741ABG01 includes two metal housings that bisect the board. Each metal housing is connected to the PCB using standoffs and five screws. Each housing is equipped with a bipolar transistor mounted on its top surface and two fuses attached to its back edge. Below these metal housings, the board is populated with multiple surface wires that end in red connectors. These connectors engage with bias jumpers mounted on the edges of the board, which are numbered for identification. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers.

 IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required